The OIL SORBENT MAT is an important device for collecting oil spills on waters. In an urgent oil spill control operation, the mechanical recovery devices should be used to recover the thicker oil spills. Then use the oil sorbent mat to absorb the thinner oil spills on the water surface. In a water area where a mechanical recovery device is unable to use, the oil sorbent mat should be used to clean up oil spills.
It has specific light weight, so it can float on the water.
Strongly lipophilic and hydrophobic, it absorbs only oil, not water.
It has good oil preservation performance, can be used repeatedly. It can be preserved for a long term without deterioration.
The product is non-toxic and tasteless, not polluting water. No toxic gas is produced during incineration.
PP-1 is mainly used to recover light oil, oil with low and medium viscosity and the volatile chemical liquids with light specific weight. PP-2 is suitable for absorbing oils of higher viscosity.
Specific Weight（g/cm3） | 0.8～1.0 |
Outer Dimensions（mm） | 2000×1000×5 |
Weight per Package (kg/pack) | 20 |
Package Size（mm） | 1000×670×350 |
Oil Absorption Capacity | 10 times more than its own weight |
Water Adsorbing Capacity | Less than 10% of its own weight |
Note | Special specifications can be customized according to user requirements |
Address： No.555 Yueyahe Road, Huangdao District, Qingdao, China
TEL：Rubber Dam & Spillway Gate; Oil Spill Recovery Equipment +8653288139929
FAX：0086-532-88139937
E-mail：sale@huahai-online.com
鲁公网安备 37021102000487号 Support | Newview
